Laser Portable LED Projector FAQ - Fix the Picture

Question: How do I fix a blurry or distorted image on my Laser Portable LED Projector?

Answer:

Model reference: PJ-TUHW1W-339

Applies to: PJ-TUHW1W-339

If your SKU differs, search our support page by your Model SKU to find the correct article.

A blurry or trapezoid-shaped image can be adjusted manually on the Laser 720P HD Portable Projector - White.

To adjust the focus:

1. Rotate the focus wheel on top of the projector.

2. Stop when the image looks clear and sharp.

3. If the image remains blurry, move the projector closer to or farther away from the projection surface.

4. Adjust the focus wheel again.

To correct a trapezoid-shaped image:

1. Press K+ or K- on the remote control.

2. Continue adjusting until the image appears rectangular.

3. Adjust the projector height or position if the image remains uneven.

4. Move the projector so it is more directly in front of the projection surface.

To reset keystone correction:

1. Open Settings.

2. Select Keystone.

3. Select Reset.

4. Press OK.

For the best picture quality, position the projector as close to the centre of the projection surface as possible.