Laser Outdoor Cinema Bundle 144 inch FAQ – Screen Setup Guide

Question: How do I set up the inflatable screen for my Laser Outdoor Cinema Bundle 144 inch?

Answer:
Model reference: PJ-AFB144-097

Setting up the inflatable screen is simple when you follow the steps correctly. The instructions below come directly from the user guide included with the Laser Smart Projector Outdoor Cinema 144 inch.
Here is how to install it safely:

1. Choose a flat, stable surface free of sharp objects. Ensure there is enough open space for projection without obstruction.

2. Unpack the inflatable screen and lay it flat on the ground with the front facing upward. Make sure the built-in blower is not blocked.

3. Locate the four anchor points on the sides of the screen. Thread the ropes through each anchor point and attach both ends of each rope to the stakes using secure double knots.

4. Connect the air pump to power and allow the screen to inflate.

5. As the screen rises, adjust ropes and stakes so it stands upright and remains stable.

6. Drive spikes into the ground at a 45 degree angle away from the screen for better wind resistance.

7. Adjust all ropes evenly so the screen is taut without overstretching.

8. Make ropes and stakes visible to avoid tripping hazards.