How do I install the NAVC-4K23-111 dash cam?
To install the NAVC-4K23-111 dash cam:
- Make sure the dash cam is turned off and insert the Micro SD card. Align the gold-plated contacts on the Micro SD card to face the dash cam screen side. Push the card in until it clicks and locks in place.
- Clean a spot on your windshield to mount the dash cam. It is recommended to install the camera on the passenger side of the rear-view mirror.
- Connect the mount to the dash cam, press the mount firmly against the windshield, and tighten the knob on the mount to create a firm seal.
- Plug one end of the supplied car charger into your vehicle’s accessory port and the other end into the dash cam. Route the cable alongside the interior trim of your vehicle for a cleaner install.
- Turn on the dash cam and format the memory card by going to Menu > System Settings > Format > Yes.
- Note: This action will delete all files and data currently on the card.
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article