NAVC-BHUD-982 - Setup Instructions

How do I set up the NAVC-BHUD-982 device?

To set up the NAVC-BHUD-982 device:

1. Attach the screen to the mounting arm.
2. Remove the protective film from the adhesive suction cup and press it onto the windscreen. Push the lock down to secure it in place.
3. Adjust the screen display angle and height, then tighten the knob to secure it.
4. Connect the power adaptor to the car’s cigarette lighter socket and the power port on the screen.
5. Power on the screen.
6. To use the car sound system for audio, tap the FM TX icon on the CarPlay screen. Choose a frequency that is not used by or next to a radio station for best reception. Tune the car radio to the same frequency on the screen.
7. Alternatively, connect the 3.5mm audio cable to the CarPlay screen’s AUX port and the car’s AUX port. Switch to AUX mode on the car stereo.