NAV-ESCOT850: Charging Your DASH 55 E-Scooter

WARNING

• Do not charge indoors.
• Power off the scooter before charging.
• Only use the supplied charger to prevent damage to the battery and components.
• Allow time for the battery to cool after use and before charging.
• Do not connect the charger if the charging port or charging cable is wet. Do not charge or use the battery if it is damaged or see trace of water.
• Charge in a cool, dry place and away from combustible materials.
• To prevent any potential hazards, do not leave the battery charging overnight or unattended. Disconnect the scooter from the charger once it is fully charged.
• Consider setting timers as a reminder to unplug.
• Connect the charger to the scooter and plug into the AC power outlet to charge. Once complete, switch off
• the mains power and disconnect the charger from the scooter.
• Inspect the battery for any damage, such as cracks, dents, or leaks. Do not use the battery or the charger if they are overheating, swelling, leaking, or venting gas.
• Make sure the cap on the port is securely closed when not in use to avoid water, moisture or dirt entering.
• Charge the battery after each use to avoid damage and maintain performance for longer. 
• Charge the scooter at storage temperature or in a moderate environment to ensure battery performance and lifespan.
• Avoid extreme hot or cold temperatures.
• Avoid overcharging and over-discharging the battery as it can cause degradation; unplug once fully charged. 
• Charge the scooter battery fully regularly to help prevent capacity loss. Avoid partial charges for optimal performance. 
• Charge your scooter regularly to avoid deep discharges, keeping the battery level above 20%.
• Avoid exposing the scooter to direct sunlight or hot environments, as it can damage the battery and reduce its capacity.